Rotating filter magnet
RO-MAG© rotating filter magnetic separation system is an ideal solution to eliminate fine ferrous contaminants from your product. This solution is specially designed to check products for ferrous contamination when the product prone to bridging and caking.
The magnetic rotor rotates inside the casing preventing blockages and results in good continuous productflow.
Especially suitable for Food application (example starch).
Product details
View all the details of this product.
Characteristics
Housing:
- Completely made of SS316
- Finishing sandblasted
- Roughness standard: 1,2 μm
- Sharp price-quality ratio
- Suitable for bridging and caking products
- Easy to clean by opening the door and remove the metal parts with easy-clean system
- Standard in-and outlet equipped with round or square flanges
- 400V – 3 phase IP65 motor gearbox
- FDA Seal EPDM white
Magnet Specs:
- NEODYMIUM
- +9.000 Gauss at the surface of easy clean measured
- Diameter magnetic bars: 25,4 mm
- Temp. Resistance -20/80°C
Technical Specifications
Standard round execution
Standard square execution
*Please note that these are the standard dimensions. All other formats and executions are possible on request without engineering costs.
Available Features
Finishing in other material
Support frame for cleaning the rotor
Initiator (safety) to prevent product transport while cleaning
Atex execution
Temperature until 250°C
Other seals like Silicon, Silicon blue, …
Other electrical connection possible
Double rotor possible for high capacity
Automatic cleaning solution
Possible connections housing:
- Other flange sizes also possible on request …
Documents on request:
- Gauss certificate
- Manual
- FDA Certificate
- ATEX Certificate
Hints
We can provide the filter magnet with a calibration certificate, so you are always in order for an audit.
Haven’t found the right magnet yet? Contact one of our specialised sales engineers. In addition to our standard solutions, we also provide customised solutions without project costs!
To help us a bit, you can already write down the product data:
- Capacity (in ton/hour)
- Humidity of product (in %)
- Density of product (in kg/mÑ)
- Available space to build-in (in mm)
- Example sketch if possible
Easy to combine
This unit is ideal for placement above a metal detector, as the metal detector is mainly useful as a final check and less as an effective separator (less product loss because of magnet)