Chute magnet
RO-MAG© chute magnetic separation system is an ideal solution to eliminate ferrous contaminants for your product in vertical product transport or angled pipe, with manual cleaning. In most of the cases, this type of magnet will be used when you have a sticky product, high product capacity or your product consists of bigger particles.
Suitable for products like animal feed, grain, to catch relatively bigger iron parts like bolts and nuts, etc.
Also suitable for Food application.
Product details
View all the details of this product.
Characteristics
Housing:
- Completely made of SS304
- Finishing sandblasted
- Sharp price-quality ratio
- Heavy-duty hinges and latches
- Easy to clean by opening the doors and remove the metal parts
- Standard in-and outlet equipped with KMH flanges for ducting rings, DIN 24154 T2 flanges for bigger diameters
- FDA Seal EPDM white
Magnet Specs:
- NEODYMIUM (ferrite possible)
- Magnetic performance: 5.000 Gauss on door
- Temp. Resistance: –20/70°C
Optional Easy Clean System:
- With an extra stainless steel plate between the magnetic door and the housing, the catched iron parts can be removed easily by separating the stainless steel plate from the magnetic door
Technical Specifications
Standard
Standard Easy Clean
Available Features
A central diverter mounted on the inlet so the product will have direct contact with the magnetic doors for best results
Finishing in other material (e.g. SS316)
Initiator (safety) to prevent product transport while cleaning (type IFM or others)
Square execution with flanges possible on request
Solution for pneumatic transport in low under- or overpressure
Possible connections housing:
- Other flange sizes also possible on request …
Documents on request:
- Gauss certificate
- Manual
- Atex certificate
- FDA certificate
Hints
We can provide the filter magnet with a calibration certificate, so you are always in compliance with an audit.
Haven’t found the right chute magnet yet? Contact one of our specialised sales engineers. In addition to our standard solutions, we also provide customised solutions without project costs!
To help us a bit, you can already write down the product data:
- Capacity (in ton/hour)
- Humidity of product (in %)
- Density of product (in kg/mÑ)
- Available space to build-in (in mm)
- Example sketch if possible
Easy to combine
This unit is ideal for placement above a metal detector, as the metal detector is mainly useful as a final check and less as an effective separator (less product loss because of magnet)